亲爱的同学们，在本教程中，我们将学习Double Designer 3个软件，这就是介绍。
Dear students, in this tutorial, we will learn due to designer three software, and this is the introduction.

我们如何创建一个新项目？
And how can we create a new project?

基本上，当您打开数字设计设计师三软件时，您将立即看到此对话框页面。
And basically, when you open digitally designing designer three software, then you will see this dialog page immediately.

新的利用数据并打开确定并打开或利用数据将打开您以前的项目状态到您的计算机中。
New utilize data and open OK and open or utilize data is going to open your previous projects the state into your computer.

但我们将从新的确定和正在创建的新项目开始。
But we will start with the new OK and new project is creating.

这里我们有一个新项目，我们可以关闭它，或者我们可以跟踪访问，我将继续访问。
And here we have the new project, which that we can close it or we can follow the visit and I will continue to visit.

现在，首先，它向我们询问我们将使用哪个系列的 HMRC。
And now, first of all, it is requesting from us which series HMRC that we are going to use.

在这里我们可以选择并使用 Jyoti 2000 系列 HMRC 以及 HMRC 的类型或型号。
And here we can select and we will work with the Jyoti 2000 series HMRC and the type of or model of the HMRC.

然后您可以选择为您的项目购买哪个 HMRC？
Then you can select which HMRC did you buy for your project?

你需要从这里选择它，好吗？
You need to select it from here, OK?

例如，我们可以选择这些一项以及水平或垂直以及我们可以从此处设置的图形设置。
For example, we can select these one and the horizontal or vertical and the graph settings that we can set it from here.

但这些都不重要，因为我们可以上去。
But these are all not important because we can go up.

我们可以回到这里，我们也可以选择另一个选项。
We can come back to here and we can select another option also.

确认就​​在这里。
And the confirmation is here.

好的，然后是制造商，那么这是很重要的一点。
OK, and then the manufacturer, then this is important point.

为什么？
Why?

首先，您要与制造商沟通哪种CPU？
First of all, which CPU that you are going to communicate than the manufacturer?

例如，如果您使用 Delta HPLC 或 Hitachi A.L.S.
For example, if you are working with the Delta HPLC or Hitachi A.L.S.

或西门子政策部门从这里选择，好吗？
or Siemens Policy Unit to select it from here, OK?

例如，如果我在这里搜索，我可以看到 Delta 产品，或者看不到 Gem TLC 产品。
And for example, if I search here, I can see the Delta products or I can't see the Gem TLC products.

好的，那么我们就使用三菱电机的产品以及我们可以从这里选择的CPU系列。
OK, then we will work with the Mitsubishi Electric products and the series of the CPU we can select from here.

这些都是服务器服务器。
And these are all the server servers.

此时，你就会看到这一点。
And at this point, you will see that.

其他选项，例如音乐智商是您可以选择的，控制器类型可以是或控制器类型可以是，例如，所有四个都是一个执行器。
And other options, for example, music IQ are this is that you can select and the controller type this can be or this can be or the controller type can be, for example, all four to an executor.

这取决于您的组件。
This is up to your component.

让我们就这样吧。
And let's leave it like that.

接下来我会说和。
And I will say next and.

我们要与 DLC 通信的地铁是哪个？
Which metro that we are going to communicate with the DLC?

好的，我们会的。
OK, we will.

我们无法与标准生活或最后的四百二十二或四百八十五次沟通联系起来。
We can't connect with the standard life or this final four hundred twenty two or four hundred and eighty five communication.

或者我们可以通过 HDMI 与爱尔兰 232 或以太网端口或扩展端口在 Pelosi 之间进行通信。
Or we can communicate with the HDMI between Pelosi with Irish 232 or Ethernet port or extended.

这些都是。
These are all.

我现在不打算谈论它们。
I'm not going to talk about them all now.

最常见的用法是什么？通常您可以使用互联网或与艺术家合作？
And what is the most common usage and commonly you can work with the internet or you can work with the artist?

四百八十五通讯。
Four hundred eighty five communication.

好吧，我们先说互联网，然后我们开始吧。
OK, let's say internet, and let's go next.

这就是通信驱动程序。
And this is the communication driver.

接下来，这没关系。
And next, this is OK.

我们会联系。
We will connect.

我们是第一频道，互联网通讯。
We are Channel one, an internet communication.

这是我的控制器类型，这是我的通信驱动程序。
This is my controller type and this is my communication driver.

接下来我会说。
And I will say next.

在这里您可以定义您的 G.O.A.T 或我的 IP 地址，因为这非常重要。
And here you can define your G.O.A.T or my IP address because this is really important.

例如，您我的IP地址是192168点3和18，并且您的策略必须在同一范围内。
For example, your my IP address is one hundred ninety two one hundred sixty eight Dot three and 18, and your policy must be same range.

好的，你的政策是开始，必须，必须从一百九十二开始，一百六十八并且必须是三。
OK, your policy is start, must, must start with one hundred ninety two, one hundred sixty eight and must be three.

并且这个不能与HMRC相同，例如，您的保单可以是十九或十七或其他数据直到两百五十六。
And this one cannot be same with HMRC, for example, your policy can be nineteen or seventeen or another data until two hundred and fifty six.

而这是我的子网和默认的，这些都OK。
And this is my subnet and default, and these are all OK.

接下来是基本屏幕和重叠，尽管这并不重要。
And next and the base screen and overlapping, though it doesn't matter.

好的，这里我们可以选择标准的屏幕设计，比如这个或者这个或者这个。
OK, and here we can select the standard screen design, for example, this one or this one or this one.

我们会工作。
We will work.

例如，让我们使用基本块来查看整个按钮或其他按钮。
For example, let's work with the basic block to see whole buttons or another.

东西可以在黑屏上非常完美地符号，我会说下一步，我会说完成。
Things can be symbol very perfectly on the black screen, and I will say next and I will say finish.

我们现在拥有，呃，编程区，听到公告，我会说好吧。
And what we have we have the, uh, programming area now and hear the announcement, and I will say just OK.

这是我的黑色屏幕和基本绿色主屏幕，然后进入左侧基本屏幕下方，你会看到这是一个。
And this is my black screen and basic green and main screen and then into the left side under the base screen, you will see this is a one.

首先，我们创建了一个新项目。
And firstly, we created a new project.

好的，那么现在我们可以设计这些 HMG，我们可以编辑我的按钮，我们可以在 HMO 上编辑我们想要的任何内容。
OK, then now we can design these HMG and we can edit my buttons and we can edit anything what we want on the HMO.

现在，下一个教程，我们将从本教程的按钮开始。
Now next tutorial, we will start with the buttons for this tutorial finished here.

下一个故事见？
See you in the next story?